InnKubaTubes – Innovative cubatures of dams and dikes using soil-filled geotextile tubes for improved flood protection

 

Key Data

Goal: Development of design rules for dikes made of soil-filled geotextile tubes

Method: Physical model tests

Duration: May 2019 to April 2022

Partner: 3

Contact

Name

Berit Finklenburg

Scientific staff

Phone

work
+49 241 80 25753

Email

E-Mail
 

Description and goals

In consideration of the EU climate goals, flood protection structures at waterways must be designed in a sustainable and resource-saving manner. This goal is pursued with the innovative design of dikes made of soil-filled geotextile tubes (topotubes). With Topotube dikes, steeper slopes can be realized, resulting in lower material and land consumption. Furthermore, due to the additional stability provided by the Topotubes, no dike breaching is expected in the event of overflow. For the implementation of the new construction method, there is currently no design approach available, that has to be developed within the InnKubaTubes project. The aim of the project is therefore to develop a design guideline for the Topotube dikes.

  Sketch of topocare's InnKubaTubes Copyright: © topocare Sketch of topocare's InnKubaTubes

Within the project, the IWW carries out physical model tests to systematically investigate the tube dike behavior during seepage and overflow by extensive parameter variation. The physical model tests are implemented both within a two-dimensional and a three-dimensional test setup. The laboratory experiments lay the scientific basic knowledge for the resistance behavior of the tube dikes including the interaction of the tubes. The work supplements the real-scale field tests to be carried out by the Technical University of East Westphalia-Lippe. With the help of the combined physical model tests, it is to be demonstrated that the overall system meets the safety-relevant requirements despite the lower land and soil consumption.

 
 

Partners and funding

The following partners are involved in the research project:

  • Topocare GmbH, Gütersloh
  • University of Applied Sciences and Arts, Detmold
  • Institute of Hydraulic Engineering and Water Resources Management, RWTH Aachen University

The InnKubaTubes project is funded by the state of North Rhine-Westphalia with resources from the European Regional Development Fund (EFRE) 2014-2020 "Investments in Growth and Employment" through the LeitmarktAgentur.NRW Projektträger ETN. The funding number is EFRE-0801533.

Logo of the EFRE NRW Funding information of the European Regional Development Fund